Sydney Wide Plastering is your team of complete interior specialists. When you need plastering or gyprocking done in Sydney, we are your first choice.
Minor wall damage is something every homeowner encounters. From dents and dings caused by moving furniture to small holes from accidental impacts, these imperfections can affect the overall appearance of your walls.
Fortunately, fixing minor wall damage is straightforward, and with the right approach, you can restore your walls to their original condition. As experts at Sydney Wide Plastering, we’re here to guide you through the process with practical and actionable advice.
Before diving into the repair process, it's crucial to identify the type of wall damage you're dealing with. This helps determine the best approach and materials needed for the repair.
Often caused by furniture bumps, door handles, or accidental knocks, these small indentations are easy to fix with minimal materials.
Nail holes, screw holes, or holes from wall anchors fall into this category. They’re common after removing picture frames or shelves.
Usually found in plaster walls due to settling or temperature changes. They require a filler to prevent future cracking.
Light scratches can occur from pets, moving objects, or general wear and tear. They often only affect the surface paint layer.
To repair minor wall damage, you need the following tools and materials:
Step 1: Prepare the Area
Use a putty knife to scrape away any loose paint or debris around the dent. Clean the area with a damp cloth to remove dust and grime.
Step 2: Apply the Filler
Scoop a small amount of plaster or filler onto your putty knife and press it into the dent. Smooth it out. Make sure it's slightly raised to compensate for shrinkage during drying.
Step 3: Sand Smooth
Once the filler is completely dry, sand the area with fine-grit sandpaper until it’s flush with the wall.
Step 4: Prime and Paint
Apply a primer to seal the repaired area. After the primer dries, paint over it, blending with the surrounding wall.
Step 1: Clean the Area
Remove any loose material around the hole. Wipe clean with a damp cloth.
Step 2: Apply a Patch (if needed)
For holes larger than a nail hole, use a self-adhesive patch. Place it over the hole with at least a 5cm overlap.
Step 3: Add Filler
Spread plaster or filler over the patch, feathering the edges to blend seamlessly with the wall.
Step 4: Sand, Prime, and Paint
After drying, sand the area smooth, apply primer, and finish with matching paint.
Step 1: Widen the Crack Slightly
Use a utility knife to create a V-shaped groove. This helps the filler adhere better.
Step 2: Apply Flexible Filler
Fill the crack with a flexible filler designed for plaster cracks. Smooth it with a putty knife.
Step 3: Sand, Prime, and Paint
Once dry, sand the surface lightly, apply primer, and repaint.
Step 1: Clean the Area
Wipe down the wall with a damp cloth.
Step 2: Light Sanding
Gently sand the scratch to smooth the edges.
Step 3: Touch-Up Paint
If the scratch is deep, apply a thin layer of filler, sand smooth after drying, then touch up with paint.
While minor wall repairs are DIY-friendly, some issues need professional attention:
At Sydney Wide Plastering, we tackle all types of plaster repairs to restore your walls perfectly.
If you're in need of professional plastering services in Sydney, contact us today. Whether it's minor wall repairs or full plaster and painting in Sydney, we’re here to help.
Call us at 0405 847 224, or submit our online form to get started. Restore your walls to perfection with Sydney Wide Plastering, your local plasterers in Sydney.
